Classes
class	Capabilities
	Serial device driver capabilities. More...

class	Modem_status
	Serial modem status More...

class	Status
	Serial port status More...

Typedefs
using	bit_number_t = uint32_t

using	config_arg_t = uint32_t

using	config_t = uint32_t

using	control_arg_t = uint32_t

using	control_t = uint32_t

using	modem_config_t = uint32_t

Enumerations
enum	Control : control_t { enable_tx = (0x15UL << CONFIG_Pos) , enable_rx = (0x16UL << CONFIG_Pos) , enable_break = (0x17UL << CONFIG_Pos) , abort_send = (0x18UL << CONFIG_Pos) , abort_receive = (0x19UL << CONFIG_Pos) , abort_transfer = (0x1AUL << CONFIG_Pos) , disable_tx = (0x25UL << CONFIG_Pos) , disable_rx = (0x26UL << CONFIG_Pos) , disable_break = (0x27UL << CONFIG_Pos) }

enum	Event : event_t { send_complete = (1UL << 0) , receive_complete = (1UL << 1) , transfer_complete = (1UL << 2) , tx_complete = (1UL << 3) , tx_underflow = (1UL << 4) , rx_overflow = (1UL << 5) , rx_timeout = (1UL << 6) , rx_break = (1UL << 7) , rx_framing_error = (1UL << 8) , rx_parity_error = (1UL << 9) , cts = (1UL << 10) , dsr = (1UL << 11) , dcd = (1UL << 12) , ri = (1UL << 13) }
	Serial Events. More...

enum class	Modem_control : modem_config_t { clear_rts , set_rts , clear_dtr , set_dtr }
	Configuration to change the serial modem lines. More...

Functions
constexpr config_t	CONFIG_Msk (0xFFUL<< CONFIG_Pos)

Variables
constexpr bit_number_t	CONFIG_Pos = 0

constexpr config_t	CPHA0 = (0UL << CPHA_Pos)
	CPHA = 1.

constexpr config_t	CPHA1 = (1UL << CPHA_Pos)

constexpr config_t	CPHA_Msk = (1UL << CPHA_Pos)
	CPHA = 0 = (default);.

constexpr bit_number_t	CPHA_Pos = 19

constexpr config_t	CPOL0 = (0UL << CPOL_Pos)
	CPOL = 1.

constexpr config_t	CPOL1 = (1UL << CPOL_Pos)

constexpr config_t	CPOL_Msk = (1UL << CPOL_Pos)
	CPOL = 0 = (default);.

constexpr bit_number_t	CPOL_Pos = 18

constexpr config_t	DATA_BITS_5 = (5UL << DATA_BITS_Pos)
	6 Data bit

constexpr config_t	DATA_BITS_6 = (6UL << DATA_BITS_Pos)
	7 Data bits

constexpr config_t	DATA_BITS_7 = (7UL << DATA_BITS_Pos)
	8 Data bits = (default);

constexpr config_t	DATA_BITS_8 = (0UL << DATA_BITS_Pos)
	9 Data bits

constexpr config_t	DATA_BITS_9 = (1UL << DATA_BITS_Pos)

constexpr config_t	DATA_BITS_Msk = (7UL << DATA_BITS_Pos)
	5 Data bits

constexpr bit_number_t	DATA_BITS_Pos = 8

constexpr config_t	DEFAULT_TX_VALUE = (0x10UL << CONFIG_Pos)
	< Set default Transmit value = (Synchronous Receive only); arg = value

constexpr return_t	ERROR_BAUDRATE = ERROR_SPECIFIC - 2
	Specified number of Data bits not supported.

constexpr return_t	ERROR_CPHA = ERROR_SPECIFIC - 8

constexpr return_t	ERROR_CPOL = ERROR_SPECIFIC - 7
	Specified Clock Phase not supported.

constexpr return_t	ERROR_DATA_BITS = ERROR_SPECIFIC - 3
	Specified Parity not supported.

constexpr return_t	ERROR_FLOW_CONTROL = ERROR_SPECIFIC - 6
	Specified Clock Polarity not supported.

constexpr return_t	ERROR_MODE = ERROR_SPECIFIC - 1
	< Specified Mode not supported

constexpr return_t	ERROR_PARITY = ERROR_SPECIFIC - 4
	Specified number of Stop bits not supported.

constexpr return_t	ERROR_STOP_BITS = ERROR_SPECIFIC - 5
	Specified Flow Control not supported.

constexpr bit_number_t	FLOW_CONFIG_Pos = 16

constexpr config_t	FLOW_CONTROL_CTS = (2UL << FLOW_CONFIG_Pos)
	RTS/CTS Flow Control.

constexpr config_t	FLOW_CONTROL_Msk = (3UL << FLOW_CONFIG_Pos)
	No Flow Control = (default);.

constexpr config_t	FLOW_CONTROL_NONE = (0UL << FLOW_CONFIG_Pos)
	RTS Flow Control.

constexpr config_t	FLOW_CONTROL_RTS = (1UL << FLOW_CONFIG_Pos)
	CTS Flow Control.

constexpr config_t	FLOW_CONTROL_RTS_CTS = (3UL << FLOW_CONFIG_Pos)

constexpr config_t	IRDA_PULSE = (0x11UL << CONFIG_Pos)
	Set Smart Card Guard Time; arg = number of bit periods.

constexpr config_t	MODE_ASYNCHRONOUS = (0x01UL << CONFIG_Pos)
	< UART = (Asynchronous);; arg = Baudrate

constexpr config_t	MODE_IRDA = (0x05UL << CONFIG_Pos)
	UART Smart Card; arg = Baudrate.

constexpr config_t	MODE_SINGLE_WIRE = (0x04UL << CONFIG_Pos)
	UART IrDA; arg = Baudrate.

constexpr config_t	MODE_SMART_CARD = (0x06UL << CONFIG_Pos)

constexpr config_t	MODE_SYNCHRONOUS_MASTER = (0x02UL << CONFIG_Pos)
	Synchronous Slave = (external clock signal);.

constexpr config_t	MODE_SYNCHRONOUS_SLAVE = (0x03UL << CONFIG_Pos)
	UART Single-wire = (half-duplex);; arg = Baudrate.

constexpr config_t	PARITY_EVEN = (1UL << PARITY_Pos)
	Odd Parity.

constexpr config_t	PARITY_Msk = (3UL << PARITY_Pos)
	No Parity = (default);.

constexpr config_t	PARITY_NONE = (0UL << PARITY_Pos)
	Even Parity.

constexpr config_t	PARITY_ODD = (2UL << PARITY_Pos)

constexpr bit_number_t	PARITY_Pos = 12

constexpr config_t	SMART_CARD_CLOCK = (0x13UL << CONFIG_Pos)
	Smart Card NACK generation; arg: 0=disabled, 1=enabled.

constexpr config_t	SMART_CARD_GUARD_TIME = (0x12UL << CONFIG_Pos)
	Set Smart Card Clock in Hz; arg: 0=Clock not generated.

constexpr config_t	SMART_CARD_NACK = (0x14UL << CONFIG_Pos)

constexpr config_t	STOP_BITS_0_5 = (3UL << STOP_BITS_Pos)

constexpr config_t	STOP_BITS_1 = (0UL << STOP_BITS_Pos)
	2 Stop bits

constexpr config_t	STOP_BITS_1_5 = (2UL << STOP_BITS_Pos)
	0.5 Stop bits

constexpr config_t	STOP_BITS_2 = (1UL << STOP_BITS_Pos)
	1.5 Stop bits

constexpr config_t	STOP_BITS_Msk = (3UL << STOP_BITS_Pos)
	1 Stop bit = (default);

constexpr bit_number_t	STOP_BITS_Pos = 14

Typedef Documentation

◆ bit_number_t

using os::driver::serial::bit_number_t = typedef uint32_t

Definition at line 66 of file serial.h.

◆ config_arg_t

using os::driver::serial::config_arg_t = typedef uint32_t

Definition at line 68 of file serial.h.

◆ config_t

using os::driver::serial::config_t = typedef uint32_t

Definition at line 67 of file serial.h.

◆ control_arg_t

using os::driver::serial::control_arg_t = typedef uint32_t

Definition at line 70 of file serial.h.

◆ control_t

using os::driver::serial::control_t = typedef uint32_t

Definition at line 69 of file serial.h.

◆ modem_config_t

using os::driver::serial::modem_config_t = typedef uint32_t

Definition at line 327 of file serial.h.

Enumeration Type Documentation

◆ Control

enum os::driver::serial::Control : control_t

Enumerator
enable_tx	Enable Transmitter. Enable Receiver
enable_rx	Enable Continuous Break transmission.
enable_break	Abort Serial::send()
abort_send	Abort Serial::receive()
abort_receive	Abort Serial::transfer()
abort_transfer	Disable Transmitter.
disable_tx	Disable Receiver.
disable_rx	Disable Continuous Break transmission;.
disable_break

Definition at line 200 of file serial.h.

◆ Event

enum os::driver::serial::Event : event_t

Serial Events.

Enumerator
send_complete	Send completed; however USART may still transmit data. Receive completed
receive_complete	Transfer completed.
transfer_complete	Transmit completed (optional)
tx_complete	Transmit data not available (Synchronous Slave)
tx_underflow	Receive data overflow.
rx_overflow	Receive character timeout (optional)
rx_timeout	Break detected on receive.
rx_break	Framing error detected on receive.
rx_framing_error	Parity error detected on receive.
rx_parity_error	CTS state changed (optional)
cts	DSR state changed (optional)
dsr	DCD state changed (optional)
dcd	RI state changed (optional)
ri

Definition at line 401 of file serial.h.

◆ Modem_control

enum class os::driver::serial::Modem_control : modem_config_t

strong

Configuration to change the serial modem lines.

Enumerator
clear_rts	Deactivate RTS. Activate RTS
set_rts	Deactivate DTR.
clear_dtr	Activate DTR.
set_dtr

Definition at line 332 of file serial.h.

Function Documentation

◆ CONFIG_Msk()

constexpr config_t os::driver::serial::CONFIG_Msk ( 0xFFUL<< CONFIG_Pos )

constexpr

Variable Documentation

◆ CONFIG_Pos

constexpr bit_number_t os::driver::serial::CONFIG_Pos = 0

constexpr

Definition at line 74 of file serial.h.

◆ CPHA0

constexpr config_t os::driver::serial::CPHA0 = (0UL << CPHA_Pos)

constexpr

CPHA = 1.

Definition at line 175 of file serial.h.

◆ CPHA1

constexpr config_t os::driver::serial::CPHA1 = (1UL << CPHA_Pos)

constexpr

Definition at line 178 of file serial.h.

◆ CPHA_Msk

constexpr config_t os::driver::serial::CPHA_Msk = (1UL << CPHA_Pos)

constexpr

CPHA = 0 = (default);.

Definition at line 172 of file serial.h.

◆ CPHA_Pos

constexpr bit_number_t os::driver::serial::CPHA_Pos = 19

constexpr

Definition at line 171 of file serial.h.

◆ CPOL0

constexpr config_t os::driver::serial::CPOL0 = (0UL << CPOL_Pos)

constexpr

CPOL = 1.

Definition at line 165 of file serial.h.

◆ CPOL1

constexpr config_t os::driver::serial::CPOL1 = (1UL << CPOL_Pos)

constexpr

Definition at line 168 of file serial.h.

◆ CPOL_Msk

constexpr config_t os::driver::serial::CPOL_Msk = (1UL << CPOL_Pos)

constexpr

CPOL = 0 = (default);.

Definition at line 162 of file serial.h.

◆ CPOL_Pos

constexpr bit_number_t os::driver::serial::CPOL_Pos = 18

constexpr

Definition at line 161 of file serial.h.

◆ DATA_BITS_5

constexpr config_t os::driver::serial::DATA_BITS_5 = (5UL << DATA_BITS_Pos)

constexpr

6 Data bit

Definition at line 101 of file serial.h.

◆ DATA_BITS_6

constexpr config_t os::driver::serial::DATA_BITS_6 = (6UL << DATA_BITS_Pos)

constexpr

7 Data bits

Definition at line 104 of file serial.h.

◆ DATA_BITS_7

constexpr config_t os::driver::serial::DATA_BITS_7 = (7UL << DATA_BITS_Pos)

constexpr

8 Data bits = (default);

Definition at line 107 of file serial.h.

◆ DATA_BITS_8

constexpr config_t os::driver::serial::DATA_BITS_8 = (0UL << DATA_BITS_Pos)

constexpr

9 Data bits

Definition at line 110 of file serial.h.

◆ DATA_BITS_9

constexpr config_t os::driver::serial::DATA_BITS_9 = (1UL << DATA_BITS_Pos)

constexpr

Definition at line 113 of file serial.h.

◆ DATA_BITS_Msk

constexpr config_t os::driver::serial::DATA_BITS_Msk = (7UL << DATA_BITS_Pos)

constexpr

5 Data bits

Definition at line 98 of file serial.h.

◆ DATA_BITS_Pos

constexpr bit_number_t os::driver::serial::DATA_BITS_Pos = 8

constexpr

Definition at line 97 of file serial.h.

◆ DEFAULT_TX_VALUE

constexpr config_t os::driver::serial::DEFAULT_TX_VALUE = (0x10UL << CONFIG_Pos)

constexpr

< Set default Transmit value = (Synchronous Receive only); arg = value

Set IrDA Pulse in ns; arg: 0=3/16 of bit period

Definition at line 183 of file serial.h.

◆ ERROR_BAUDRATE

constexpr return_t os::driver::serial::ERROR_BAUDRATE = ERROR_SPECIFIC - 2

constexpr

Specified number of Data bits not supported.

Definition at line 239 of file serial.h.

◆ ERROR_CPHA

constexpr return_t os::driver::serial::ERROR_CPHA = ERROR_SPECIFIC - 8

constexpr

Definition at line 257 of file serial.h.

◆ ERROR_CPOL

constexpr return_t os::driver::serial::ERROR_CPOL = ERROR_SPECIFIC - 7

constexpr

Specified Clock Phase not supported.

Definition at line 254 of file serial.h.

◆ ERROR_DATA_BITS

constexpr return_t os::driver::serial::ERROR_DATA_BITS = ERROR_SPECIFIC - 3

constexpr

Specified Parity not supported.

Definition at line 242 of file serial.h.

◆ ERROR_FLOW_CONTROL

constexpr return_t os::driver::serial::ERROR_FLOW_CONTROL = ERROR_SPECIFIC - 6

constexpr

Specified Clock Polarity not supported.

Definition at line 251 of file serial.h.

◆ ERROR_MODE

constexpr return_t os::driver::serial::ERROR_MODE = ERROR_SPECIFIC - 1

constexpr

< Specified Mode not supported

Specified baudrate not supported

Definition at line 236 of file serial.h.

◆ ERROR_PARITY

constexpr return_t os::driver::serial::ERROR_PARITY = ERROR_SPECIFIC - 4

constexpr

Specified number of Stop bits not supported.

Definition at line 245 of file serial.h.

◆ ERROR_STOP_BITS

constexpr return_t os::driver::serial::ERROR_STOP_BITS = ERROR_SPECIFIC - 5

constexpr

Specified Flow Control not supported.

Definition at line 248 of file serial.h.

◆ FLOW_CONFIG_Pos

constexpr bit_number_t os::driver::serial::FLOW_CONFIG_Pos = 16

constexpr

Definition at line 145 of file serial.h.

◆ FLOW_CONTROL_CTS

constexpr config_t os::driver::serial::FLOW_CONTROL_CTS = (2UL << FLOW_CONFIG_Pos)

constexpr

RTS/CTS Flow Control.

Definition at line 155 of file serial.h.

◆ FLOW_CONTROL_Msk

constexpr config_t os::driver::serial::FLOW_CONTROL_Msk = (3UL << FLOW_CONFIG_Pos)

constexpr

No Flow Control = (default);.

Definition at line 146 of file serial.h.

◆ FLOW_CONTROL_NONE

constexpr config_t os::driver::serial::FLOW_CONTROL_NONE = (0UL << FLOW_CONFIG_Pos)

constexpr

RTS Flow Control.

Definition at line 149 of file serial.h.

◆ FLOW_CONTROL_RTS

constexpr config_t os::driver::serial::FLOW_CONTROL_RTS = (1UL << FLOW_CONFIG_Pos)

constexpr

CTS Flow Control.

Definition at line 152 of file serial.h.

◆ FLOW_CONTROL_RTS_CTS

constexpr config_t os::driver::serial::FLOW_CONTROL_RTS_CTS = (3UL << FLOW_CONFIG_Pos)

constexpr

Definition at line 158 of file serial.h.

◆ IRDA_PULSE

constexpr config_t os::driver::serial::IRDA_PULSE = (0x11UL << CONFIG_Pos)

constexpr

Set Smart Card Guard Time; arg = number of bit periods.

Definition at line 186 of file serial.h.

◆ MODE_ASYNCHRONOUS

constexpr config_t os::driver::serial::MODE_ASYNCHRONOUS = (0x01UL << CONFIG_Pos)

constexpr

< UART = (Asynchronous);; arg = Baudrate

Synchronous Master = (generates clock signal); arg = Baudrate

Definition at line 79 of file serial.h.

◆ MODE_IRDA

constexpr config_t os::driver::serial::MODE_IRDA = (0x05UL << CONFIG_Pos)

constexpr

UART Smart Card; arg = Baudrate.

Definition at line 91 of file serial.h.

◆ MODE_SINGLE_WIRE

constexpr config_t os::driver::serial::MODE_SINGLE_WIRE = (0x04UL << CONFIG_Pos)

constexpr

UART IrDA; arg = Baudrate.

Definition at line 88 of file serial.h.

◆ MODE_SMART_CARD

constexpr config_t os::driver::serial::MODE_SMART_CARD = (0x06UL << CONFIG_Pos)

constexpr

Definition at line 94 of file serial.h.

◆ MODE_SYNCHRONOUS_MASTER

constexpr config_t os::driver::serial::MODE_SYNCHRONOUS_MASTER = (0x02UL << CONFIG_Pos)

constexpr

Synchronous Slave = (external clock signal);.

Definition at line 82 of file serial.h.

◆ MODE_SYNCHRONOUS_SLAVE

constexpr config_t os::driver::serial::MODE_SYNCHRONOUS_SLAVE = (0x03UL << CONFIG_Pos)

constexpr

UART Single-wire = (half-duplex);; arg = Baudrate.

Definition at line 85 of file serial.h.

◆ PARITY_EVEN

constexpr config_t os::driver::serial::PARITY_EVEN = (1UL << PARITY_Pos)

constexpr

Odd Parity.

Definition at line 123 of file serial.h.

◆ PARITY_Msk

constexpr config_t os::driver::serial::PARITY_Msk = (3UL << PARITY_Pos)

constexpr

No Parity = (default);.

Definition at line 117 of file serial.h.

◆ PARITY_NONE

constexpr config_t os::driver::serial::PARITY_NONE = (0UL << PARITY_Pos)

constexpr

Even Parity.

Definition at line 120 of file serial.h.

◆ PARITY_ODD

constexpr config_t os::driver::serial::PARITY_ODD = (2UL << PARITY_Pos)

constexpr

Definition at line 126 of file serial.h.

◆ PARITY_Pos

constexpr bit_number_t os::driver::serial::PARITY_Pos = 12

constexpr

Definition at line 116 of file serial.h.

◆ SMART_CARD_CLOCK

constexpr config_t os::driver::serial::SMART_CARD_CLOCK = (0x13UL << CONFIG_Pos)

constexpr

Smart Card NACK generation; arg: 0=disabled, 1=enabled.

Definition at line 192 of file serial.h.

◆ SMART_CARD_GUARD_TIME

constexpr config_t os::driver::serial::SMART_CARD_GUARD_TIME = (0x12UL << CONFIG_Pos)

constexpr

Set Smart Card Clock in Hz; arg: 0=Clock not generated.

Definition at line 189 of file serial.h.

◆ SMART_CARD_NACK

constexpr config_t os::driver::serial::SMART_CARD_NACK = (0x14UL << CONFIG_Pos)

constexpr

Definition at line 195 of file serial.h.

◆ STOP_BITS_0_5

constexpr config_t os::driver::serial::STOP_BITS_0_5 = (3UL << STOP_BITS_Pos)

constexpr

Definition at line 142 of file serial.h.

◆ STOP_BITS_1

constexpr config_t os::driver::serial::STOP_BITS_1 = (0UL << STOP_BITS_Pos)

constexpr

2 Stop bits

Definition at line 133 of file serial.h.

◆ STOP_BITS_1_5

constexpr config_t os::driver::serial::STOP_BITS_1_5 = (2UL << STOP_BITS_Pos)

constexpr

0.5 Stop bits

Definition at line 139 of file serial.h.

◆ STOP_BITS_2

constexpr config_t os::driver::serial::STOP_BITS_2 = (1UL << STOP_BITS_Pos)

constexpr

1.5 Stop bits

Definition at line 136 of file serial.h.

◆ STOP_BITS_Msk

constexpr config_t os::driver::serial::STOP_BITS_Msk = (3UL << STOP_BITS_Pos)

constexpr

1 Stop bit = (default);

Definition at line 130 of file serial.h.

◆ STOP_BITS_Pos

constexpr bit_number_t os::driver::serial::STOP_BITS_Pos = 14

constexpr

Definition at line 129 of file serial.h.

Classes

Typedefs

Enumerations

Functions

Variables

Typedef Documentation

◆ bit_number_t

◆ config_arg_t

◆ config_t

◆ control_arg_t

◆ control_t

◆ modem_config_t

Enumeration Type Documentation

◆ Control

◆ Event

◆ Modem_control

Function Documentation

◆ CONFIG_Msk()

Variable Documentation

◆ CONFIG_Pos

◆ CPHA0

◆ CPHA1

◆ CPHA_Msk

◆ CPHA_Pos

◆ CPOL0

◆ CPOL1

◆ CPOL_Msk

◆ CPOL_Pos

◆ DATA_BITS_5

◆ DATA_BITS_6

◆ DATA_BITS_7

◆ DATA_BITS_8

◆ DATA_BITS_9

◆ DATA_BITS_Msk

◆ DATA_BITS_Pos

◆ DEFAULT_TX_VALUE

◆ ERROR_BAUDRATE

◆ ERROR_CPHA

◆ ERROR_CPOL

◆ ERROR_DATA_BITS

◆ ERROR_FLOW_CONTROL

◆ ERROR_MODE

◆ ERROR_PARITY

◆ ERROR_STOP_BITS

◆ FLOW_CONFIG_Pos

◆ FLOW_CONTROL_CTS

◆ FLOW_CONTROL_Msk

◆ FLOW_CONTROL_NONE

◆ FLOW_CONTROL_RTS

◆ FLOW_CONTROL_RTS_CTS

◆ IRDA_PULSE

◆ MODE_ASYNCHRONOUS

◆ MODE_IRDA

◆ MODE_SINGLE_WIRE

◆ MODE_SMART_CARD

◆ MODE_SYNCHRONOUS_MASTER

◆ MODE_SYNCHRONOUS_SLAVE

◆ PARITY_EVEN

◆ PARITY_Msk

◆ PARITY_NONE

◆ PARITY_ODD

◆ PARITY_Pos

◆ SMART_CARD_CLOCK

◆ SMART_CARD_GUARD_TIME

◆ SMART_CARD_NACK

◆ STOP_BITS_0_5

◆ STOP_BITS_1

◆ STOP_BITS_1_5

◆ STOP_BITS_2

◆ STOP_BITS_Msk

◆ STOP_BITS_Pos